Connecting To A Computer - Philips VOICE TRACER DVT2510 User Manual

1
Turn down the volume of the device before you plug in the
headphones.
2
Insert the stereo jack into the headphone connection EAR on the
side of the device.
3
Turn up the volume until you reach a comfortable listening level.
The speaker is switched off when headphones are connected.

4.7 Connecting to a computer

You can select one of the following options once you have connected
the device to a computer
18
First steps
• A USB mass storage device: You can use the File Explorer to
access the device data without installing additional software. It is
automatically displayed as a mass storage device similarly to a USB
memory stick or card. It is a convenient way to store, back up and
and move files. (see also chapter 4.7.1 Transferring files from or to
the device, page 19).
• Power supply via USB: Record while powered through USB
without draining the battery. You can record until the memory is
full.
Tip
• To start recording press the record key g for at least two
seconds while the device is connected to the computer.
1
Plug the USB connector into a USB port on your computer.
2
Insert the micro USB plug into the USB port on the bottom of the
device.
The device is displayed as a mass storage device in File
X
Explorer.
Table of contents