Chevrolet 2003 Impala Owner's Manual page 52

Securing a Child Restraint Designed
for the LATCH System
1. Find the anchors for the seating position you want
to use, where the bottom of the seatback meets the
back of the seat cushion.
2. Put the child restraint on the seat.
3. Attach the anchor points on the child restraint to the
anchors in the vehicle. The child restraint
instructions will show you how.
4. If the child restraint is forward-facing, attach the top
strap to the top strap anchor. See Top Strap on
page 1-41. Tighten the top strap according to
the chifd restraint instructions.
5. Push and pull the child restraint in different
directions to be sure it is secure.
Securing a Child Restraint in a Rear
Seat Position
If your child restraint is equipped with the LATCH
system, see lower Anchorages and Top Tethers for
Ciskken (LATCH Syste,?)
on
page
1-43.
To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect the
anchor points.
1 -45