Equipment Description - Dexter Power NC600JS User Manual

Original Instructions
JIG SAW
The numbers in the following text refer to the drawing on page 2-3.
WARNING -To reduce the risk of injury, user must read instruction manual. Save all warnings and instructions
for future reference.
Contents:
1 Machine data
2 Safety instructions
3 Assembly
4 Use
5 Service & Maintenance
Intended use
The machine is intended for making separating cuts and cutouts in wood, plastic, metal, ceramic plates and rubber while resting
firmly on the workpiece. It is suitable for straight and curved cuts having miter angles of up to 45°. Do not use machines, tools and
accessories for additional applications (see manufacturer's instructions) for works other than those for which they are designed
for. All other applications are expressly ruled out.
1.

EQUIPMENT DESCRIPTION

Technical specification:
Type designation
Rated voltage
Rated power input
Speed, n
0
Cutting angle range
EN
Cutting capacity
Blade type
suggestion:
1) wear glove during operation
2) limit operating time and shorten trigger time.
Contents of packing
1 Jig saw
1 Dust extraction adaptor
1 Hex key
1 Blade for wood
1 Parrallel guide
1 Instruction manual (with 1 safety instructions and 1 guarantee card)
After unpacking, check the tool and accessories for damages and do not use the tool in case something is defective.
Features
Fig. 1
1. ON/OFF switch
2. Lock-on button
16
NC600JS Jig Saw
220V~ 60Hz
600W
0-3000/min
0-45°
Wood: 65mm Steel: 10mm
T SHAPE
Dexter Power