Troubleshooting - Kampa Fornello Operating Manual

3. Disconnect the device from the gas container
(see chapter "Disconnecting the device from
the gas container" on page 15).
4. Clean the device (see chapter "Cleaning and
maintenance" on page 15).
5. Close the lid.

Troubleshooting

Fault
The ignition fails.
The burner provides no
gas with the burner con-
trol knob in "MAX" posi-
tion.
16
Possible cause
The control knob of the desired burner is
not in "MAX" position.
The control knob of the desired burner is
defect.
The air inlet of the burner is blocked.
The injector is blocked.
The gas container is not connected prop-
erly.
The electrode of the ignition button is bent
or rusty.
The gas container is empty.
The control knob of the desired burner is
defect.
The air inlet of the burner is blocked.
The injector is blocked.
The gas container is not connected prop-
erly.
6. Store the device on a level, stable place out of
the reach of children or pets.
7. Store the gas cylinder outdoors in a well-venti-
lated, shaded area away from any heat source
or open flame and out of reach of children,
pets or wild animals.
4445103380
Solution
Turn the control knob of the desired burner
to "MAX" position (see fig. 7, page 7).
This can only be repaired by an authorized
repair center.
Clean the air inlet (see chapter "Cleaning
the burners" on page 15).
Clean the injector (see chapter "Cleaning
the burners" on page 15).
Connect the gas container properly (see
chapter "Connecting the device to a gas
container" on page 14).
Clean the injector (see chapter "Cleaning
the burners" on page 15).
Replace the gas container (see chapter
"Connecting the device to a gas
container" on page 14).
This can only be repaired by an authorized
repair center.
Clean the air inlet (see chapter "Cleaning
the burners" on page 15).
Clean the injector (see chapter "Cleaning
the burners" on page 15).
Connect the gas container properly (see
chapter "Connecting the device to a gas
container" on page 14).