Sony PCV-V300G VAIO User Guide (primary manual) User Manual page 124

Installing a memory module
1.
Remove the memory module from its anti-static package, handling it by the edges.
2. Locate the center notch on the bottom edge of the memory module and align it to the center notch in the open
module slot.
Installing a m em ory m odule
3.
Firmly insert the bottom edge of the module into the slot by pressing down evenly against the module's upper
corners.
The side latches snap into position, holding the memory module in place.
To avoid damaging a memory module or the memory module slot, move the side latches slightly outward to
relieve pressure. The module is properly inserted when the side latches click into place.
Page 124