Sony PCV-V100G VAIO User Guide (primary manual) User Manual page 76

About the PC Card Slot
Your computer has a card bus PC Card slot that supports Type I or Type II PC (PCMCIA) Cards. You do not need to shut
down your computer when inserting a PC Card. For more information, see the instructions supplied with your PC Card.
Inserting a PC Card
1.
With the label facing up, insert the PC Card into the PC Card slot.
Inserting a PC Card
2. Push the PC Card gently into the slot. The card is automatically detected and the
icon appears in the Windows
If the PC Card does not insert easily, remove it from the PC Card slot and verify that it is not upside-down or
backwards. Carefully reinsert the PC Card, without forcing it into the slot.
Removing a PC Card
1.
Close all software programs that may access the PC Card, to avoid data loss.
2.
Double-click the
3.
Click to select the name of the card that you want to eject and click Stop. The Stop a Hardware Device window
appears. Click OK.
4.
When the message "Safe to Remove Hardware" appears, push the PC Card Eject button on the right panel of
the computer. Extend the Eject button out from the computer before attempting to eject the card.
Rem ov ing a PC Card
taskbar.
®
Safely Remove Hardware icon in the Windows
Safely Remove Hardware
taskbar.
®
Page 76