Sony PCV-V100G VAIO User Guide (primary manual) User Manual page 25

To connect the wireless optical mouse
1.
Press the CONNECT button on the left panel of the computer.
2. Turn the wireless mouse over.
3. Slide the power button to the ON position and press the CONNECT button.
Connecting the m ouse
4. Place the optical mouse on an appropriate surface to enable tracking.
Additional information about the wireless optical mouse
The wireless optical mouse requires an ideal surface texture in order to provide precision pointing and tracking.
 Use surfaces such as plain paper, card stock, or fabric that have minimal repetitive patterns.

Avoid surfaces such as mirrors, smooth glass, or magazines that have half- tone printing.
The wireless optical mouse requires unobstructed communication with the system unit for proper operation.
 Do not exceed a maximum distance of 2 feet between your VAIO
 Confirm that the supplied AA batteries are properly installed.

Press the Connect buttons located on the left panel of the computer and on the bottom of the mouse, to establish
the communication between the equipment.
 Verify the infrared receiver on the computer's front panel is free of obstructions that may prevent proper operation.
computer and your wireless mouse.
®
Page 25