Chevrolet 2001 Tahoe Owner's Manual page 274

10. Now start the vehicle with the good battery and run
the engine for awhile.
11. Try to start the vehicle with the dead battery. If it
won't start after a few tries, it probably needs service.
12. Remove the cables in reverse order to prevent
electrical shorting. Take care that they don't touch
each other or any other metal.
9. When connecting the
cable, be sure it is not
near any engine parts
that will move.
Jumper Cable Removal
A. Heavy, Unpainted Metal Engine Part
B. Good Battery
C. Dead Battery
1. Disconnect the black negative (
heavy, unpainted metal engine part on the vehicle
that had the dead battery.
2. Disconnect the black negative (
-
negative ( ) terminal on the vehicle with the
good battery.
-
) cable from the
-
) cable from the
5-7