DeWalt DXPW4240 Instruction Manual page 18

This warranty covers defects in material and workmanship and not
parts failure due to normal wear, depreciation, abuse, accidental
damage, negligence, improper use, maintenance, or storage. To make
a claim under the terms of the warranty, all parts said to be defective
Warranty Service Center for warranty inspection. The judgments and
decisions of the manufacturer concerning the validity of warranty
claims are final.
These warranties pass through to the end user and are non-
transferable. As a factory authorized and trained Warranty Service
Center, the factory will honor the terms of all component warranties
and satisfy claims of the appropriate warranty provisions.
Normal wear items include, but are not limited to, valves and seals,
which are not covered by this warranty.
This warranty replaces all other warranties, express or implied,
including without limitation any warranties of merchantability or fitness
for a particular purpose and all such warranties are hereby disclaimed
obligation is limited to repair and replacement of defective products as
provided herein and the manufacturer shall not be liable for any further
loss, damages, or expenses – including damages from shipping,
accident, abuse, acts of God, misuse, or neglect. Neither is damage
from repairs using parts not purchased from the manufacturer or
alterations performed by non-factory authorized personnel. Failure to
the instruction manual shall void warranty.
This warranty does not cover the following: machines used for
rental purposes, damage resulting from shipping (claims must be
filed with freighter), accident, abuse, act of God, misuse, or neglect.
Neither is damage from repairs or alterations performed by non-
according to the guidelines put forth in the instruction manual.
damage, for personal injury, or for commercial loss.
ENGINE
Covered by engine manufacturer warranty. See engine manual.
HIGH PRESSURE PUMP (DEFECTS IN MATERIAL AND
WORKMANSHIP)
Two (2) years from date of purchase.
WARRANTY DOES NOT APPLY TO FAILURES DUE TO:
authorized dealer or not approved by the manufacturer.
parts.
FRAME (DEFECTS IN MATERIAL AND WORKMANSHIP)
One (1) year from date of purchase.
ACCESSORIES (DEFECTS IN MATERIAL AND
WORKMANSHIP)
Includes nozzles, hoses, spray guns, wands
Ninety (90) days from date of purchase.
Bypass mode: Allows water to re-circulate within pump when the gun
trigger is not pulled.
Chemical hose: Feeds cleaning agents into the pump to mix with the
water. Refer to Chemicals and Cleaning Solvents.
18