Download Print this page

Advertisement

Available languages

Available languages

Quick Links

Please read and follow all of the instructions & safety precautions detailed below prior to using this
product. Failure to do so may result in serious personal injury and / or property damage.
Read all the instructions before using the product.
Power bank main unit contains an internal lithium polymer battery. Upon initial use or after a
prolonged storage period, fully charge it once. The unit's full performance is achieved only after 2
or 3 completed charge and discharge cycles.
Power banks are not allowed in checked luggage on commercial airline flights. Handle with care
and dispose of in accordance to local regulations. Carry-on only.
To reduce the risk of injury, close supervision is necessary when the product is used near
children.
Do not put fingers or hands into the ports of product.
Do not expose power bank to rain, snow, water or liquids.
Use of a power supply or charger not recommended or sold with power bank manufacturer may
result in a risk of fire or injury to persons.
Do not use the power bank in excess of its output rating. Overload outputs above rating may
result in a risk of fire or injury to persons.
Do not use the power bank that is damaged or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
Do not disassemble the power bank. Bring unit to a qualified service person when service or
repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature
above 100°C may cause explosion. The temperature of 100°C is equivalent to the temperature of
212°F.
Have servicing performed by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the product is maintained.
Do not charge an electronic device while the power bank unit is being charged.
Disconnect charging cable from the power bank when not in use
The T123/T1232/T1233/T1234 is a UL 2056 Certified 8,000 mAh power bank.
product specifications & user guide.
T123/T1232/T1233/T1234 Specifications
1. Item No.: T123/T1232/T1233/T1234
2. Model: SP0363
3. Battery Type: UL Certified Lithium Polymer battery
4. Battery Duration/Lifespan: 300 times
5. Battery/Cell Capacity: DC 3.7V / 8,000 mAh; 29.6Wh
WARNING
T123/T1232/T1233/T1234 USER MANUAL
Please see below

Advertisement

loading
Need help?

Need help?

Do you have a question about the T123 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Spector&Co T123

  • Page 1 Do not charge an electronic device while the power bank unit is being charged.  Disconnect charging cable from the power bank when not in use T123/T1232/T1233/T1234 USER MANUAL The T123/T1232/T1233/T1234 is a UL 2056 Certified 8,000 mAh power bank. Please see below product specifications & user guide. T123/T1232/T1233/T1234 Specifications 1.
  • Page 2 USB output port (DC 5V/1A) ON/OFF Power Button 4 LED indicators Light-up logo location T123/T1232/T1233/T1234 Operation 1) ON: Press ON/OFF button once 2) OFF: Press ON/OFF twice NOTE: The T123/T1232/T1233/T1234 will automatically power OFF when inactive for approx. 60 seconds.
  • Page 3 1. Insert the micro-USB plug of the charging cable into the micro-USB input port of T123/T1232/T1233/T1234 (see # 1 on Product Map) & connect USB plug of cable to a power supply (wall adapter with DC 5V output – not included).
  • Page 4: Fcc Statement

    CAUTION: Risk of Fire and Burns, don’t open, crush, disassemble and dispose of in fire. Accessible surfaces held or touched for short periods only. Don’t heat above 50 °C or Incinerate. Follow Manufacturer’s Instructions FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.
  • Page 5  Débrancher le câble de chargement du chargeur lorsqu’il n’est pas utilisé Manuel de l’utilisateur du T123/T1232/T1233/1234 Le T123/T1232/T1233/T1234 est un chargeur certifié UL 2056 8,000 mAh. Ci-dessous les spécifications et le mode d’emploi du produit. Spécifications des T123/T1232/T1233/T1234 1. Article Nº.: T123/T1232/T1233/T1234...
  • Page 6 12. Temps de charge du chargeur (de 0 à 100%): jusqu’à 6 heures 13. La boîte inclut :  1câble de recharge micro-USB/USB  1 manuel de l’utilisateur  1chargeur T123/T1232/T1233/T1234 14. Nom du produit : Chargeur Sol Diagramme du T123/T1232/T1233/T1234 Description Port d’entrée micro-USB...
  • Page 7 2. Les lumières LED bleues clignoteront pendant que le T123/T1232/T1233/T1234 charge et la lumière LED bleue demeurera fixe une fois la charge complétée. NOTE : le logo illuminé (voir #6 du diagramme) demeurera allumé pendant que le T123 / T1232 / T1233 / T1234 charge Charge de dispositifs électroniques au moyen du T123/T1232/T1233/T1234 avec câble de charge...
  • Page 8: Déclaration De La Fcc

    ITE: Accessoires Batterie au lithium-polymère AVERTISSEMENT : Risque d’incendie et de brûlures ; ne pas ouvrir, briser, démonter ni jeter dans le feu ou incinérer. Ne toucher les surfaces accessibles ni saisir l’appareil que brièvement. Température de travail maximale 50ºC. Suivre le mode d’emploi du fabricant. DÉCLARATION DE LA FCC Cet appareil est conforme au point 15 du règlement de la FCC.
  • Page 9  Desconectar el cable de carga cuando no se usa. Manual del usuario del T123/T1232/T1233/T1234 El T123/T1232/T1233/T1234 est un cargador certificado UL 2056 de 8,000 mAh. A continuación el modo de empleo y las especificaciones del producto. Especificaciones del T123/T1232/T1233/T1234 1.
  • Page 10 13. Tiempo de carga (de 0 à 100%): hasta 6 horas 14. Incluídos en la caja:  1cable de recarga micro-USB/USB  1manual del usuario  1 cargador T123/T1232/T1233/T1234 15. Nombre del producto: Cargador Sol Diagrama del T123/T1232/T1233/T1234 Descripción Puerto de entrada Micro-USB Puerto de salida USB (5V/2.1A CC)
  • Page 11 Recarga del T123/T1232/T1233/T1234 1. Insertar el conector micro-USB del cable de carga en el puerto micro-USB del T123/T1232/T1233/T1234 (ver # 1 del diagrama) y conectar el USB del cable a una fuente de corriente mural (adaptador de 5V CC – no incluido).
  • Page 12 ITE: Accesorios Batería litio-polímero ADVERTENCIA : Riesgo de incendio y quemaduras; no abrir, quebrar, desmontar ni arrojar al fuego o incinerar. No tocar las superficies accesibles ni agarrar el dispositivo por mucho rato. Temperatura de trabajo máxima 50ºC. Seguir las instrucciones del fabricante. DÉCLARACIÓN DE LA FCC Este aparato cumple con la norma 15 del reglamento de la FCC.

This manual is also suitable for:

T1232T1233T1234Pto-t1234Pto-t1233