Download Print this page

Advertisement

Available languages

Available languages

Quick Links

Please read and follow all of the instructions & safety precautions detailed below prior to using this
product. Failure to do so may result in serious personal injury and / or property damage.
Read all the instructions before using the product.
Power bank main unit contains an internal lithium polymer battery. Upon initial use or after a
prolonged storage period, fully charge it once. The unit's full performance is achieved only after 2 or 3
completed charge and discharge cycles.
Power banks are not allowed in checked luggage on commercial airline flights. Handle with care and
dispose of in accordance to local regulations. Carry-on only.
To reduce the risk of injury, close supervision is necessary when the product is used near children.
Do not put fingers or hands into the ports of product.
Do not expose power bank to rain, snow, water or liquids.
Use of a power supply or charger not recommended or sold with power bank manufacturer may result
in a risk of fire or injury to persons.
Do not use the power bank in excess of its output rating. Overload outputs above rating may result in
a risk of fire or injury to persons.
Do not use the power bank that is damaged or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk of injury.
Do not disassemble the power bank. Bring unit to a qualified service person when service or repair is
required. Incorrect reassembly may result in a risk of fire or injury to persons.
Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature above
100°C may cause explosion. The temperature of 100°C is equivalent to the temperature of 212°F.
Have servicing performed by a qualified repair person using only identical replacement parts. This will
ensure that the safety of the product is maintained.
Do not charge an electronic device while the power bank unit is being charged.
Disconnect charging cable from the power bank when not in use
Wireless charging is most efficient when smartphone is placed directly over the QI certified wireless
charging dock
It is recommended to remove smartphone from cases with credit card holders as wireless charging
may demagnetize credit cards
It is recommended to remove smartphone from heavy & thick cases, or from multi-functional cases
(ex: credit card holder cases or cases with magnetic feature) when recharging your device as these
may disrupt wireless charging capability
The T1029 is a UL 2056/UL2738 Certified 10,000 mAh power bank with QI Certified wireless charging
capability. Please see below product specifications & user guide.
WARNING
T1029 USER MANUAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the T1029 and is the answer not in the manual?

Questions and answers

Summary of Contents for Spector&Co T1029

  • Page 1 (ex: credit card holder cases or cases with magnetic feature) when recharging your device as these may disrupt wireless charging capability T1029 USER MANUAL The T1029 is a UL 2056/UL2738 Certified 10,000 mAh power bank with QI Certified wireless charging capability. Please see below product specifications & user guide.
  • Page 2 T1029 Specifications 1. Item No.: T1029 2. Model No.: SP0381 3. Battery Type: UL Certified Lithium Polymer battery 4. Battery Duration/Lifespan: 300 times 5. Battery/Cell Capacity: DC 3.7V / 10,000 mAh; 37Wh 6. Product Capacity (USB): DC 5V / 5,600 mAh; 28Wh 7.
  • Page 3 NOTE: The T1029 will automatically power OFF when inactive for approx. 60 seconds. To Recharge T1029 1) Insert the micro-USB output of the charging cable into the T1029 & connect USB output to a power supply (wall adapter with DC 5V output – not included). Press Power Button once.
  • Page 4: Fcc Statement

     To verify remaining battery percentage of T1029 press power button 4 blue LED (from left to right) indicates 100 – 75% battery power remaining 3 blue LED (from left to right) indicates 75 – 50% battery power remaining 2 blue LED (from left to right) indicates 50 – 25% battery power remaining 1 blue LED (from left to right) indicates 25 –...
  • Page 5 Il est conseillé de retirer le cellulaire de tout étui lourd ou épais, ou étui avec des composants métalliques ou magnétiques, lors d’une recharge car ceux-ci pourraient perturber les capteurs responsables du chargement sans fil Manuel de l’utilisateur du T1029...
  • Page 6 Le T1029 est un chargeur sans fil certifié QI et UL 2056/UL2738 de 10,000 mAh. Ci-dessous les spécifications du produit et son mode d’emploi. Spécifications du T1029 1. Article Nº : T1029 2. Modèle Nº : SP0381 3. Type de batterie : Lithium polymère certifiée UL 4.
  • Page 7 Pour recharger le T1029 1) Insérer la sortie micro-USB du câble de chargement dans le T1029 et connecter la sortie USB à une source d’énergie (adaptateur de prise de courant murale de 5V CC – non inclus). Appuyer une fois sur le bouton d’allumage.
  • Page 8: Déclaration De La Fcc

    éteindre la lumière et les fonctions de chargement.  Pour vérifier le niveau de batterie du T1029 appuyer sur le bouton d’allumage 4 bleue LED (de gauche à droite) signalent 100 – 75% de niveau de batterie 3 bleue LED (de gauche à droite) signalent 75 – 50% de niveau de batterie 2 bleue LED (de gauche à...
  • Page 9 Se recomienda retirar el teléfono inteligente de las carcasas o estuches gruesos con componentes metálicos o magnéticos (por ejemplo, fundas de portatarjetas de crédito o estuches con funciones magnéticas) antes de utilizar la carga inalámbrica, ya que pueden afectar los sensores de carga inalámbrica MANUAL DEL USUARIO DEL T1029...
  • Page 10 El T1029 es un cargador inalámbrico UL 2056/UL2738 de 10,000 mAh con certificación QI. Ver especificaciones e instrucciones de uso del producto Especificaciones del T1029 1. Artículo Nº.: T1029 2. Modelo Nº.: SP0381 3. Tipo de batería: Polímero de litio certificada UL 4.
  • Page 11 Para recargar el T1029 1) Insertar la salida micro-USB del cable de carga en el T1029 y conectar la salida USB a una fuente de corriente (adaptador de toma de corriente CC 5V – no incluido). Oprimir una vez botón de encendido.
  • Page 12  Para verificar nivel de batería del T1029 oprimir botón de encendido 4 LED azul (de izquierda a derecha) señala 100 – 75% nivel de batería 3 LED azul (de izquierda a derecha) señala 75 – 50% nivel de batería 2 LED azul (de izquierda a derecha) señala 50 –...