Asus AAEON NanoCOM-WHU User Manual page 41

Options Summary
Delayed POST (PEI
phase)
Enabled – Robot holds BIOS from starting POST, right after power. This allows BIOS
POST to start with stable power or start after system is physically warmed-up.
Note: Robot does this before 'Sends watch dog'.
Delayed POST (DXE
phase)
Enabled – Robot holds BIOS from starting POST, right after power. This allows BIOS
POST to start with stable power or start after system is physically warmed-up.
Note: Robot does this before 'Sends watch dog'.
Reset System once Disabled
Enabled – Robot resets system for one time on each boot. This will send a soft or hard
reset to onboard devices, thus puts devices to more stable state.
Chapter 3 – AMI BIOS Setup
Disabled
Enabled
Disabled
Enabled
Enabled
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
29