Sony PCV-RX830 Quick Start Manual page 47

Why isn't my DVD playing properly?
If a region code warning appears when you are using the DVD player
application, it may be that the region code of the DVD you are trying to play is
incompatible with the region code setting of your optical drive. A region code is
listed on the disc packaging. Region code indicators such as "1" or "ALL" are
labeled on some DVDs to indicate the type of player that can play the disc.
Unless a "1" or "ALL" appears on the DVD or on its packaging, you cannot play
the disc on this system.
If you hear audio but cannot see video, your computer's video resolution may be
set too high. To improve video resolution, verify that your screen area is set to
1024 x 768, using 32-bit color (preset factory default). To verify or change your
video resolution:
1 Click Start in the Windows taskbar and then select Control Panel.
2 Select Appearances and Themes, then select Change the screen
resolution.
3 Click the Settings tab and change the Screen resolution and Color quality to
the desired levels.
4 Click Apply, then click OK.
If you see video but cannot hear audio:
Verify that your DVD player's mute feature is turned off.
❑
❑ Check the master volume setting in the Audio Mixer.
Check the volume settings on your computer speakers.
❑
Check the connections between your speakers and the computer.
❑
Verify that drivers are installed properly, by following these steps:
❑
1 Click Start in the Windows taskbar, then select Control Panel.
2 Click Performance and Maintenance and then click Systems. The
System Properties dialog box appears.
3 Select the Hardware tab, then select the Device Manager button to
view installed drivers.
A dirty or damaged disc may also cause the drive to stop responding while it tries
to read the disc. If necessary, remove the disc and check for dirt or damage.
✍
To recover the CD or DVD software applications that are preinstalled on your
computer, see "Reinstalling software" for more information.
About Using The Optical Disc Drive(s)
47