To Install A Pci Add-On Card - Sony PCV-RX770 Computer User Guide (primary manual) User Manual

To Install a PCI Add-on Card

Your computer may have one or more open PCI expansion slots, depending on the model configuration. A PCI slot enables
you to install add-on cards to expand the functionality of your system. The length of the add-on card should not exceed
9.05 inches.
Add-on card configuration varies by model. Some models, such as Configure-to-Order (CTO) systems, may contain
preinstalled add-on cards.
Observe the proper safety precautions when you add cards to your Sony computer. See
your computer.
Inserting an add-on card
1.
Shut down your computer and turn off all peripheral devices, such as your printer.
2. Unplug your computer and any peripheral devices.
3. Remove the side panel. See
4. Locate an available expansion slot. Remove the screw, and then remove the slot cover.
When removing a slot cover, be careful not to damage components on the system board or add-on
cards. You may need to temporarily remove add-on cards that are next to the slot cover you want to remove.
Rem ov ing the slot cov er
5.
Install the add-on card by inserting it into the expansion slot and securing it with the screw from the expansion
slot cover.
Installing an add- on card
6. Attach any internal cables that the card requires. See the instructions supplied with the add-on card.
Removing the side panel.
Before you upgrade
Page 73