Connecting the modem cable
1.
Unplug your telephone from the wall jack.
2.
Plug the modem cable (supplied) into the Modem line jack on the computer, and then plug the other end of the
cable into the wall jack.
Connecting the m odem cable
Your computer has a protective sticker
Connect only 10BASE-T and 100BASE-TX cables to the Ethernet port. Using other cables or a telephone cable
may result in an electric current overload and can cause a malfunction, excessive heat or fire in the port. For help
on connecting to a network, see your network administrator.
covering the Ethernet port located on the rear panel.
Page 17
Need help?
Do you have a question about the PCV-RX770 Computer User Guide (primary manual) and is the answer not in the manual?
Questions and answers