Philips 24PFS5603/12 Service Manual page 14

3.2.2 IR board Control Unit
1. Unplug connector [2] from the IR board control unit.
2. Remove the IR lens, IR board from the DECO_REAR_COVER.
When defective, replace the whole unit.
3.2.3 Rear Cover
Warning: Disconnect the mains power cord before removing the rear cover.
24" 5603 Series:
1. Releasing the clips carefully at the indicated areas [2] that secure the back cover.
2. Unplug connector [3] carefully, as the speaker is catch on back cover.
3. Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.
2
2
2