Advertisement
Available languages
Available languages
+
WELCOME TO L-ACOUSTICS
Thank you for purchasing the L-ACOUSTICS
1 WIFOTILT tilting accessory.
After the careful opening of the shipping carton, check for any noticeable damage. If so, notify the shipping company or
the distributor immediately. Only the consignee may initiate a claim with the carrier for damage incurred during
shipping. Be sure to save the carton and packing materials to be inspected by the carrier.
Carefully read this document in order to become familiar with the product and to identify the external documents
containing essential information on installing and operating the product properly and safely. All the documents
mentioned are freely available on the L-ACOUSTICS
As part of a continuous evolution of techniques and standards, L-ACOUSTICS
change the specifications of its products and the content of its documents without prior notice. Please visit
the L-ACOUSTICS
®
web site on a regular basis to download latest updates for documents and software.
WIFOTILT TILTING ACCESSORY
The WIFOTILT tilting accessory used to stack up to 4 ARCS WiDE / FOCUS on SB18m and set their site angle.
USING THE WIFOTILT
Refer to the ARCS WIDE / FOCUS rigging manual for the rigging procedures and the safety limits.
MAINTENANCE
It is essential to inspect the product on a regular basis to ensure performance and safety.
Any maintenance operation not recommended by L-ACOUSTICS
Contact L-ACOUSTICS
EC DECLARATION OF CONFORMITY
L-ACOUSTICS
®
13 rue Levacher Cintrat
Parc de la Fontaine de Jouvence
91462 Marcoussis Cedex
France
States that the following product:
WIFOTILT tilting accessory
Is in conformity with the provisions of:
2006/42/EC: Machinery Directive
Applied rules and standards:
EN ISO 12100: 2004 (Mechanical Safety)
Eurocode 3/EN 1993, formerly: DIN 18800
®
WIFOTILT. The shipping carton should contain:
®
®
for maintenance.
w w w . l - a c o u s t i c s . c o m
web site: www.l-acoustics.com.
®
will void the warranty.
®
Established at Marcoussis, France, June 1
Christophe PIGNON, Research & Development Director
Before installation, assess the mechanical safety
of a system by modeling it with SOUNDVISION
software.
®
reserves the right to
st
, 2014
Advertisement
