Control Bar Buttons - NETGEAR VueZone User Manual

Control Bar Buttons

There are six controls on the tool bar: start/stop streaming, record video, take a snapshot,
zoom, adjust brightness, and full screen/time lapse mode.
Figure 8. Cameras tab control bar
The following table describes the control bar buttons.
Table 2. Control Bar Buttons
Button Description
Start/Stop
Starts and stops video stream, or stops recording if it is recording.
Streaming
Record
Starts and stops recording video clips. The border around the video
turns red when recording is in progress. You can also see the time
lapse in the top right corner.
Snapshot
Takes still images.
Zoom Allows you to zoom into the video by up to 4x, and zoom back out.
Brightness There are three settings: bright light, normal, and low light.
Full Screen Expands the video to your full computer screen. Press Escape to exit
this setting.
VueZone System
Control bar
Cameras Tab
20