Install Camera Batteries - NETGEAR VueZone User Manual

Install Camera Batteries

Depending on the camera model, you need to install either one or two batteries. The camera
batteries are provided in the package.

To install camera batteries:
Slide the battery latch toward the camera back, and press down on the bottom of the
1
door to remove it.
Insert the battery with then negative (-) end first. Be sure to follow the polarity indication on
2
the sticker inside the camera.
Snap the battery door back in place by inserting the top portion of the door first and clicking
3
the bottom portion into place.
Wait until you close the battery door before you turn on the camera
Tip:
power for syncing with the VueZone base station.
VueZone System
Getting Started
10