Display
en
--------
Indicator/
Description
symbol
Programme status:
Drying
^
Dryness level: Iron Dry
æ
Dryness level: Cupboard Dry
»
Dryness level: Cupboard Dry
Ò
Plus
Anti-Crease
Ý
- ˜ -
Pause
Program end
"Ÿš
‹ ‹ : ‹ ‹
Programme duration
e.g. f 02:
Programme delay
45
Empty the condensation con-
ð
tainer ~ Page 32
Fluff filter
¥
Automatic heat exchanger rinse
é
Rinsing progress indicator
ø
Basic appliance care pro-
''§"
gramme
Appliance settings
à
22
Information
Continuously lit: Status indicator
Expected programme duration in hours and minutes.
Appears when altering and activating the "Ready in" time
Empty the condensation container and then reinsert
■
it.~ Page 32
Then press ‹ (Start/Pause).
Clean the filter in the condensation container.
■
If the optional drain hose* is installed, make sure that
■
the drain hose:
– Is correctly connected. ~ Page 40
– Is not kinked or bent.
– Is not blocked or clogged, e.g. by deposits.
Run the intensive appliance care programme.
■
Check that no debris has found its way into the base
■
unit. Open the maintenance flap and remove any
debris.
Remove the fluff ~ Page 33
The heat exchanger is cleaned automatically. Do not pull
out the condensation container or cancel the programme
while this is displayed.
Not a fault. After a certain period, the appliance will auto-
matically recommend that you run the basic appliance care
programme. Run the basic appliance care programme.
~ Page 50
Alter the appliance settings ~ Page 35