Download Print this page

Sealey SSP155DX.V2 Instructions page 2

Disposable welding mask

Advertisement

3. FITTING INSTRUCTIONS
WARNING! Ensure the mask is correctly fitted before use.
3.1.
Hold the mask in your hand with the nosepiece at your fingertips. Allow the headbands to hang
freely below your hand.
3.2.
Cup the mask firmly against your face with the nosepiece on the bridge of your nose.
3.3.
Stretch and pull the lower headband over the head and position below your ears.
Stretch and pull the top headband on the back of your head above your ears.
3.4.
Press soft nosepiece to conform snugly around the nose.
3.5.
Test the fit of the mask by cupping both hands over the mask and inhaling sharply. A negative pressure
should be felt inside the mask.
Notes: a) If air flows around your nose, tighten the nosepiece.
b) If air leaks around the edges, reposition the headbands for better fit.
c) Facial hairs or beards and certain facial characteristics may reduce the effectiveness of
the mask.
4. STORAGE
Keep the mask in the closed box in a dry and clean place until required for use. Keep away from direct sunlight.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
4001, 7001 & 10QJ
Issue: 2 - 12/10/09

Advertisement

loading