Sony VAIO PCV-E201 Reference Manual page 85

I/O Device Configuration
Serial port A:
Base I/O address
Interrupt*:
Parallel port:
†
Mode :
Base I/O address
Interrupt‡:
DMA channel
Floppy disk controller:
Base I/O address:
Large Disk Access Mode:
Local Bus IDE adapter:
Sound:
* This option appears only if the port is set to Enabled.
† This option appears only if the port is set to Auto or Enabled.
‡ This option appears only if the port is set to Enabled and Mode is not set to EPP.
** This option appears only if the port is set to Enabled and Mode is set to ECP.
[Auto]
Disabled
Enabled
*
: [3F8]
2F8
3E8
2E8
[IRQ 4]
IRQ 3
[Auto]
Disabled
Enabled
[ECP]
Output only
Bi-directional
EPP
‡
: [378]
278
3BC
[IRQ 7]
IRQ 5
**
: [DMA 3]
DMA 1
[Enabled]
Auto
Disabled
[Primary]
Secondary
[DOS]
Other
[Both]
Disabled
Primary
Secondary
[Enabled]
Disabled
BIOS Setup Options
77