Turn And Lane-Change Signals - Cadillac 2005 SRX Owner's Manual

Turn and Lane-Change Signals

To signal a turn, move the lever all the way up or
down. The lever returns automatically when the turn
is complete.
Raise or lower the lever until the arrow starts to flash
to signal a lane change. Hold it there until the lane
change is complete. The lever returns to its original
position when it's released.
3-8
An arrow on the instrument
panel cluster will flash
in the direction of the turn
or lane change.
Arrows that flash rapidly when signaling for a turn or
lane change may be caused by a burned-out signal bulb.
Other driver's won't see the signal.
Replace burned-out bulbs to help avoid possible
accidents. Check the fuse and for burned-out bulbs if
the arrow fails to work when signaling a turn. See Fuses
and Circuit Breakers on page 5-93 for more information.
Turn Signal On Chime
If the turn signal is left on for about 1 mile (1.6 km),
a warning chime will sound and the Turn Signal
On message will appear on the Driver Information
Center (DIC) display. See "Turn Signal On" under
DIC Warnings and Messages on page 3-57 for more
information.