Subscribe to Our Youtube Channel
Related Manuals for Wenglor EtherCAT ZAC50CN0 Series
Summary of Contents for Wenglor EtherCAT ZAC50CN0 Series
- Page 1 ZAC50CN0x Ethernet Junctions Operating instructions Available as PDF only Status: 07.09.2016 www.wenglor.com...
- Page 2 Index 1. Proper Use 2. Safety Precautions 3. Approvals and IP Protection 4. Technical Data 4.1. Connection table ZAC50CN0x 4.2. Housing Dimensions 4.2.1 ZAC5xxN01 4.2.2 ZAC50xN02 4.3. Complementary Products 5. Application Notes 6. Mounting Instructions 7. Initial Operation 7.1. System Structure 7.2.
- Page 3 A Junction is an active network component which distributes data to the corresponding addresses within a network in a targeted fashion. wenglor junctions are fitted optionally with additional Power over Ethernet tech- nology. The power supply is integrated into existing network connection by means of Power over Ethernet. As an addition to Industrial Ethernet, there are several digital inputs and outputs directly on the junction that can be activated or evaluated via the network.
- Page 4 4. Technical Data Order number ZAC50CN01 ZAC50CN02 Supply voltage 18...32 V DC 18...32 V DC Max. Current Consumption Device * 0.3 A 0.25 A Max. Current Consumption System ** 2.2 A max. PoE Capacity 30 W 25 W Temperature range –25...60 °C –25...60 °C Voltage drop junctioning outputs...
- Page 5 Socket 3 Socket 3 +24 V DC Socket 4 Socket 4 Socket 4 Suitable Plug: Function www.wenglor.com 0 V DC 0 V DC +24 V DC U System +24 V DC U Digital I/O / Sensor Socket 1 Socket 2...
- Page 6 4.2. Housing Dimensions 4.2.1 ZAC5xxN01 4.2.2 ZAC50xN02...
- Page 7 4.3. Complementary Products Connection plug, 7/8", 5-pin Order number: ZAT77NN01 Suitable Plug: Connection socket, 7/8", 5-pin Order number: ZAB78NN01 Suitable Plug: Connecting cable, 7/8", 5-pin Order number: ZAV78R201, Suitable Plug: Cable length: 2 m...
- Page 8 Connecting line, 7/8", 5-pin Order number: ZAS78R601, Suitable Plug: Cable length: 10 m Connector Plug RJ45; 8-pin Order number: ZAT45NN01 Suitable Plug: Connection plug, M12×1; 8-pin Order number: ZAT50NN01 Suitable Plug:...
- Page 9 Connecting cable M12×1; 8-pin Order number: ZAV50R201, Order number: ZAV50R501, Suitable Plug: Cable length: 2 m (ZAV50R201) Cable length: 5 m (ZAV50R501) Order number: ZAV50R502, Suitable Plug: Cable length: 5 m Connecting line M12×1, 8-pin Order number: ZAS50R601 Suitable Plug: Cable length: 10 m Connection plug, M12×1, 4-pin Order number: ZAT51NN01...
- Page 10 Connecting cable M12×1; 4-pin; D-coding Order number: ZAV51R201, Order number: ZAV51R601, Suitable Plug: Cable length: 2 m (ZAV51R201) Cable length: 10 m (ZAV51R601) Order number: ZAV51R202, Order number. ZAV51R602, Suitable Plug: Cable length: 2 m (ZAV51R202) Cable length: 10 m (ZAV51R602) Connection and power supply cables M12×1;...
- Page 11 In the event of improper use, the guarantee and liability claim against the manufacturer shall lapse. Information concerning which cables and accessories are approved for installation can be found at www.wenglor.com or are described in this manual.
- Page 12 7.1. System Structure Industrial Ethernet Digital Digital Digital I/O-Port I/O-Ports I/O-Port Power * x1 designated the EtherCAT IN Port 7.2. Power Cable Power In Power Out Pin 1 Pin 1 Pin 2 Pin 2 Pin 3 Pin 3 24 V max. 9 A Pin 4 System 24 V max.
- Page 13 (for tightening torque see “Housing Dimensions” on page 13). 7.4. Industrial Ethernet Cable wenglor provides a variety of preassembled industrial Ethernet cables. To ensure cabling as simple and reliable as possible, we recommend using our preassembled industrial Ethernet cables.
- Page 14 7.5. Industrial Ethernet Cable with Power over Ethernet To ensure cabling as simple and reliable as possible, we recommend using our preassembled industrial Ether- net cables. In addition, several branches can be connected. The PoE ports (x2 – x6) can also be used for this purpose.
- Page 15 7.7. Diagnosis Assignment example: Status PoE max Status PoE max www.wenglor.com www.wenglor.com Power Power ZAC50CN01 ZAC50CN02...
- Page 16 7.7.1 LED Display EtherCAT Device (ZAC50CN0x) Status PoE max The status displays for the communication are marked on the junction with status and MS. Designation Condition Function Green off ESM state: Initialisation Green flashing ESM state: PRE - Operational Flashing green once ESM state: SAFE - Operational Green on ESM state: Operational...
- Page 17 The LED display on the M12 sockets displays the diagnosis for the corresponding socket. Designation Condition Function No Ethernet device is connected to the port An Ethernet device is connected to the port Green An Ethernet device which is currently communicating Green flashing is connected to the port Designation...
- Page 18 • You will need the EtherCAT XML Device Description File (ESI-File EtherCAT Slave Information) which is available at www.wenglor.com › Product World › Product search (Order number) › Download › Product Description Files.
- Page 19 Detailed description of the object directory for EtherCAT 8.1 I/O Direction Register (0x2010) Index Name Default Value 0x2010:00 Highest sub-index supported 0x2010:01 I/O Direction 0x00 0x2010:01 Value range 1 Byte Port – – – – 1, Pin 4 0, Pin 4 1, Pin 2 0, Pin 2 Bit value...
- Page 20 8.3 PoE Control (0x2030) Index Name Default Value 0x2030:00 Highest sub-index supported 0x2030:01 Power Monitoring Control FALSE (enabled) 0x2030:02 PoE Port Control 0x1f (ZAC50CN01) bzw. 0x03 (ZAC50CN02) 0x2020:01 Value range 1 Byte Monitoring – – – – – – – on/off Bit value –...
- Page 21 Pre-OP mode. For information on how to configure the network parameters please refer to the instructions “Start-Up-EtherCAT-Device” (www.wenglor.com › Product World › Product search (Order number) › Download › General instructions) in the chapter “Displaying and working with the integrated web server”.
- Page 23 In order to now be able to open the website of the Junction (in the example ZAC50CN01), the IP address must be entered in the address bar of the browser as described ® Example: 192.168.100.1 (IP address set, for example, via TwinCAT in the area EoE of the Junction) The overview page Device General is not password-protected.
- Page 24 After the connection has been established, the overview page of the Junction is displayed. Through the language selection, the website can be changed from English (delivery state) to German, Italian, French or Spanish. 9.3. Device settings Display of the network settings and PoE parameters...
- Page 25 PoE information (ZAC50CN01): The Junction continuously monitors the current PoE performance consumption. The website displays the maxi- mum available PoE performance of the Junction and the currently reserved and outgoing PoE performance. Every PoE device registers in a specific PoE performance class when starting. This performance is then reserved in the Junction.
- Page 26 9.4. Industrial Ethernet Ports Settings The page Port Settings/Industrial Ethernet Ports provides an overview of the individual ports of the Junction. You can switch between the individual ports using the tab on the uppermost level. The Industrial Ethernet ports contain information on the EtherCAT Port status and invalid frames as well as an error counter of the EtherCAT input frames.
- Page 27 9.5. Digital I/O Ports Settings The Junction has 2 ports with two digital inputs/outputs each The digital inputs/outputs are parameterized via the page Digital I/O Ports. Please note: Parameterization of the inputs/outputs is only possible with the device in Pre-Op mode. Pin 2 and pin 4 can each be configured as input or output.
- Page 28 Respectively valid national waste disposal regulations apply to product disposal. 12. EU Declaration of Conformity The EU declaration of conformity can be found on our website at www.wenglor.com in download area.
- Page 29 This operating manual is only a general description of technical processes whose implementation does not apply to every individual application.
Need help?
Do you have a question about the EtherCAT ZAC50CN0 Series and is the answer not in the manual?
Questions and answers