Creator CRT-531 Series Product Specification

Creator CRT-531 Series Product Specification

Card dispenser

Advertisement

SPECIFICATION
Model No.
CRT-531
Date
2010-2-1
Card Dispenser
Ver.
3.0
Page
1/13
CRT-531 SERIES
CREATOR (CHINA) TECH CO., LTD.
·ADD:2F, M-10 Building, Center Area, Hi-tech Industrial Park,
Shenzhen Guangdong China
·TEL:+86 755 26710691
FAX:+86 755 26710105
·Http://www.china-creator.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CRT-531 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Creator CRT-531 Series

  • Page 1 SPECIFICATION Model No. CRT-531 Date 2010-2-1 Card Dispenser Ver. Page 1/13 CRT-531 SERIES CREATOR (CHINA) TECH CO., LTD. ·ADD:2F, M-10 Building, Center Area, Hi-tech Industrial Park, Shenzhen Guangdong China ·TEL:+86 755 26710691 FAX:+86 755 26710105 ·Http://www.china-creator.com...
  • Page 2: Table Of Contents

    SPECIFICATION Model No. CRT-531 Date 2010-2-1 Card Dispenser Ver. Page 2/13 CONTENTS ……………………………………………………………………. 3 OVERVIEW …………………………………………………. 3 GENERAL SPECIFICATIONS 3. FUNCTION………………………………………………………………….. .3 4. RS232 COMMUNICATION PROTOCOL………………………………… 4 5. ADJUST THE THICKNESS OF CARD DISPENSING………………… .10 6. MAINTENANCE AND CAUTIONS……………………………………… 11 6.
  • Page 3: Overview

    Page 3/13 1. OVERVIEW CRT-531 series are card dispensing module equipment with RS232 and TTL interface to dispense all kinds of cards. Card can be captured when the user doesn’t take the card or there is any error during operation.
  • Page 4: Function

    SPECIFICATION Model No. CRT-531 Date 2010-2-1 Card Dispenser Ver. Page 4/13 Long: 170PCS Extra Long:285PCS 9) Card pre-empty detection 20~80pcs±2pcs 10) Environmental conditions Operation: 0~50℃ 0~90% RH ( Without Condensing) Storage:-10~75℃ 0~90% RH ( Without Condensing) 3. FUNCTIONS 1) Detection function To detect the card empty, card pre-empty or being full of error card bin 2) Doubled card dispensing prevention function Mechanical design, one motor forward, the other motor backward operation, to...
  • Page 5 SPECIFICATION Model No. CRT-531 Date 2010-2-1 Card Dispenser Ver. Page 5/13 Data bit : 8 bits Parity bit : None Stop bit : 1 bit “1” D1 D2 D3 D4 D5 D6 D7 “0” Data bit Start bit 4.2 Command structure 4.2.1 Send command 〈STX〉...
  • Page 6 SPECIFICATION Model No. CRT-531 Date 2010-2-1 Card Dispenser Ver. Page 6/13 1 0 0 0 0 0 0 0 0 0 0 0 Dispensing card 0 1 0 0 0 0 0 0 0 0 0 0 Capturing card 0 0 1 0 0 0 0 0 0 0 0 0 Card Dispense error...
  • Page 7 SPECIFICATION Model No. CRT-531 Date 2010-2-1 Card Dispenser Ver. Page 7/13 8000 (Reserve) 4000 (Reserve) 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 2000 Failure alarm (sensor 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 1000...
  • Page 8 SPECIFICATION Model No. CRT-531 Date 2010-2-1 Card Dispenser Ver. Page 8/13 4.4 Extend CRT Command Command + Return Comment Parameter Card stop on the specified position , “FC”+ Position <06H> , 1 , 2 , 3 , 4 , 5 , 6} parameter: 0x30,0x34,0x33,0x32,0x31,0x36,0x37}...
  • Page 9 SPECIFICATION Model No. CRT-531 Date 2010-2-1 Card Dispenser Ver. Page 9/13 No.6 Card stop Sensor 1 No.3 1112323212 card stop No.1 card stop, Dispense card to exit. leave Sensor 3 No.5 card stop, Sensor2 1112323212 No.2 card stop No.0 card stop No.4 card stop, Card reading,...
  • Page 10: Adjust The Thickness Of Card Dispensing

    SPECIFICATION Model No. CRT-531 Date 2010-2-1 Card Dispenser Ver. Page 10/13 Procedure as follow:: Main controller :〈STX〉DC〈ETX〉〈BCC〉 Card dispenser : Send ACK/NAK Main controller : ENQ Main controller Card dispenser Card : : dispensing and modification Send‘RF’ constantly of status register until card dispensing...
  • Page 11: Maintenance And Cautions

    SPECIFICATION Model No. CRT-531 Date 2010-2-1 Card Dispenser Ver. Page 11/13 There are several steps to adjust the thickness of cards: 1. Confirm the thickness of cards ( Raised type character are not involved in) 2. Push the turn-knob and turn around to the graducation pointed by the red arrow. Seeing pictures below.
  • Page 12: Cautions For Programme

    SPECIFICATION Model No. CRT-531 Date 2010-2-1 Card Dispenser Ver. Page 12/13 4)Use soft cloth with alcohol to clean the dirty cards and replace the distortion cards 5) Check the graduation of knob to see whether they are corresponding. 6.2 Cautions for safe use 1 )...
  • Page 13: Structure And Dimension Drawing

    ±0.62 深 圳 市 创 自 技 术 有 限 公 司 3.装配尺寸 、角度尺寸公差按 > 50~ 120 ±0.15 ±0.30 ±0.74 3级公差带执行 > 120~ 250 CREATOR (CHINA) TECH CO., LTD ±0.21 ±0.40 ±1.00 标 记 处 数 更改文件号 签 字 日 期...

Table of Contents