The DSP 2.4X has 2 inputs and 4 independent outputs that allow adjustments The DSP 2.4X is a digital audio processor that offers a huge range of high to the audio individually for each output through several functions and features...
RCA connectors, provide the audio processed according to the settings made on the processor. Navigation keys Navigation and control of the DSP 2.4X are made via the MAIN CONTROL knob and the HOTKEYS hotkeys. 1. SEQUENCER: It allows sequential activation of other products through the remote...
Q the greater the width of that equalization band, affecting to a Phase greater extent the neighboring frequencies . The DSP 2.4X has 5 parametric equalizers distributed as follows, 1 for the inputs Limiter and 4 for the outputs (1 for output).
Page 5
• Limiter HPF OUT f:12 Hz LR48 To protect your amplifiers and speakers, the DSP 2.4X has a limiter with an integrated “Dynamic Attack-Release” system for each of the 4 outputs. Use this function to LPF OUT1 attenuate and prevent damage to the system caused by signal peaks.
Page 6
MAIN CONTROL If you want to restore all of the DSP 2.4X factory settings, simultaneously hold down the MUTE ALL (ENTER) go to the output field and select “ALL- HOTKEY shortcut keys for outputs 1, 2 and 3 while turning on the device.
Page 7
When the output is turned off, it will not SEQUENCER trigger when the processor is turned on FREQUENCY SWEEP S1: ON again. [ON] Example of installing the "SEQUENCER" feature: Radio / PRV AUDIO Player AMPLIFIER 1 AMPLIFIER 2 AMPLIFIER 3 Battery...
Product modification Crossover with Variable Frequency: Linkwitz-Riley: 12/18/24/36/48 dB/8ª ▪ Misuse and neglect When a product is sent to PRV Audio for warranty ▪ Abuse (items returned repeatedly for the same A, B or A+B Routing between Inputs and Outputs:...
Need help?
Do you have a question about the DSP 2.4X and is the answer not in the manual?
Questions and answers