IMPORTANT: Please read before using and retain for future reference. IMPORTANT NOTES INTRODUCTION Thank you for buying our product. Please read through these operating instructions, so you will know how to operate your equipment properly. After you finished reading the instructions manual, put it away in a safe place for future reference.
CAUTION: LISTENING AT A HIGH VOLUME OVER A LONG PERIOD IS NOT GOOD FOR YOUR EARS. RADIO OPERATION TUNING RADIO STATIONS 1. Press the STANDBY/FUNCTION button to choose radio mode: FM 2. Tune to the desired station by pressing /TUN.+ or /TUN.- button, the station frequency will show on the display.
Note: To ensure good system performance, wait until the disc tray completely reads the disc before proceeding. If no disc loaded into the compartment, or the disc is place upside down or unreadable, the display will show “ ”.
To repeat all the Tracks 1. Press CD REP. button twice in play, the REP indicator will show steady on the display, all tracks on the disc will be played over and over again till you press STOP button. 2. To cancel repeat play, press CD REP. button until the REP indicator disappears. RANDOM PLAY Press the CD RDM button in Play/Stop mode to activate random playback, the RDM indicator will show on the display, playback will start from any one track (not in the order of the disc).
TYPES OF CASSETTE Use only good quality cassettes (IEC TYPE 1) for making recordings. May be used to replay other types of cassette but is unable to make proper recording on these more specialized tapes. The use of C120 cassettes is NOT recommended in this machine. PROTECTING RECORDING Normally, anything recorded on the tape is automatically erased when new recording is made.
Page 9
GENERAL Power Requirement AC 100-240 ~ 60/50Hz DC 9V U M-2/C x 6 PCS Power consumption 12 Watts Weight Approx.1.46 kg Dimensions 285mm (W) x 213mm (D) x 140mm (H) Operation temperature C – +35 RECEIVER SECTION Receiving Bands Tuning Range FM 87.5–...
Need help?
Do you have a question about the P 70 and is the answer not in the manual?
Questions and answers