Lennox LI009HI-230P432 Service Manual page 144

Service Manual
Steps
9. Remove compressor
Remove the 3 foot nuts fixing compressor and then
lift the compressor upwards to remove the
compressor and damping cushion.
Note:
Keep the ports of discharge pipe and suction pipe
from foreign objects.
condenser sub-assy
10. Remove
a
Remove the screws connecting the support
(condenser) and condenser assy,and then remove
the support(condenser).
b
Remove the 2 screws fixing the condenser and
chassis, and then lift the condenser upwards to
remove it.
Installation and Maintenance
Procedure
support
chassis subassy
compressor
condenser
sub-assy
141