Advertisement
1
2
3
4. MAINTENANCE
4.1
To change the battery on the detector, slide the cover off as shown in fig.7, replace the battery and cover.
4.2
To change the battery on the transmitter, remove the four screws on the rear of the unit (fig.5) and remove the back cover (fig.6).
Replace the battery and the back cover, ensuring that the small cut out for the switch is at the switch end.
4.3
If the detector and transmitter are not used for long periods of time, remove the batteries.
4.4
store the PP4.V2 kit in it's case and keep in a dry safe childproof location.
5. DECLARATION OF CONFORMITY
Declaration of Conformity
We, the sole uK importer, declare that the products listed below are in conformity with the following standards and directives.
Ultrasonic Leak Detector
Model No: PP4.V2
2004/108/EC EmC directive
93/68/EEC CE marking directive
2002/95/EC RoHs directive
2002/96/EC WEEE directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
4
5
6
7
fig.1
Screws
fig.5
Sole Uk Distributor
Sealey Group,
Bury st. Edmunds, suffolk.
fig.6
The construction files for these products is held by the manufacturer and may
be inspected, by a national authority, upon request to Jack sealey ltd.
signed by Tim Thompson
For Jack Sealey Ltd. Sole UK importer of Sealey Professional Tools
01284 757500
01284 703534
Sensitivity Control
fig.2
Headphones
Volume
Control
fig.3
Cut out
11th may 2009
www.sealey.co.uk
W e b
sales@sealey.co.uk
email
PP4.V2
Issue no: 1 - 11/05/09
fig.4
fig.7
Advertisement
