Advertisement
2.
INTRODUCTIOIN
3.
OPERATION
3.1
remove bolt (fig.4.B) from handle (fig.4.A).
3.2
select the correct adaptor (fig.4.c), one which is slightly smaller than the diameter of the seal/bearing
race, and position it correctly on the handle, secure it using the bolt.
3.3
Place the seal/bearing race (fig.4.E or f) in the mouth of the housing (fig.4.D), place adaptor against it
and tap the driver handle to force it into place (fig.5).
fig.4
ALWAYS WEAR SAFETY GOGGLES WHEN USING DRIVERS
Users of drivers are reminded that damage to the striking faces can take place and we
recommend that safety goggles are worn when using this tool.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack sealey Ltd
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park,
Bury st. Edmunds, suffolk,
IP32 7Ar
Original Language Version
● Set of bearing and seal drivers.
● Cleverly designed, ideal for installation of
bearing races.
● Composite material prevents damage
to bearing or housing.
● Driver Sizes ø: 39.5, 44.5, 50, 59, 63, 65, 72,
76, 81mm
01284 757500
01284 703534
fig.5
www.sealey.co.uk
Web
sales@sealey.co.uk
email
Vs709
Issue: 1 - 25/10/12
Advertisement
