Advertisement
3.4. fit the door frame panel into the unit from the inside locating the
frame with the side panels at the top and bottom.
3.5. fit the locker top from the inside with the two holes at the back
lined up with the two holes in the back panel.
3.6. Bend the tabs in at the front of the top, making sure that they
locate into the locking holes in the door frame (figs.4 & 5).
fig.4
3.7. Place the bottom shelf into the locker with the two cut outs
facing towards the door (fig.6), push it down into place.
3.8. carefully tip locker over backwards and lower to the floor.
secure the bottom shelf to the back panel using two screws
(fig.7). Stand locker up.
fig.6
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
3.9. sL1D: Place shelf (different design) onto locating brackets.
3.10. Place hanging bar(s) in position, SL1D and SL2D only (fig.9).
fig.5
3.11. Insert a lock into hole in each door and position correctly.
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business
Park, Bury st. Edmunds, suffolk,
IP32 7AR
Original Language Version
SL2D and SL4D: All shelves are the same design as the bottom
shelf with two cut-outs that face towards the door. Locate each
one and push down into place.
If required, drill holes and fix shelves in position with a retaining
screw (fig.8).
fig.7
fig.8
secure with nut. Position the lever at the correct angle and
secure with screw and washer (fig.10).
01284 757500
01284 703534
fig.9
fig.10
www.sealey.co.uk
Web
sales@sealey.co.uk
email
SL1D, SL2D, SL4D Issue: 1 - 18/02/10
Advertisement
