Advertisement
4.
ASSEMBLY AND USE
Refer to diagrams
4.1
remove locking bar from rollcab and stow in slot on top right hand side front.
4.2. Open door and remove box from shelf.
4.3. Remove boxes from side of Topchest.
4.4. remove topchest from rollcab.
4.5. fit shelf in rollcab.
4.6. remove tool rack and casters from top drawer of rollcab.
4.7. fit castors, tool rack and hooks and handle to the door. Place topchest on the rollcab.
4.8. Lock the topchest by lifting the lid and dropping the short locking bar into the slot on the bottom front lip.
Lock the rollcab by hooking the long lock bar under the front lip and securing the top with a padlock (not supplied).
Parts support is available for this product. to obtain a parts listing and/or a diagram please log on to: www.sealey.co.uk,
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack sealey Limited
email: sales@sealey.co.uk or phone: 01284 757500
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business
Park, Bury st. Edmunds, suffolk,
IP32 7Ar
Original Language Version
www.sealey.co.uk
01284 757500
W e b
sales@sealey.co.uk
01284 703534
email
AP150f
Issue: 1 - 22/04/13
Advertisement
