Download Print this page
TONIN CASA Sunset Assembly Instructions

TONIN CASA Sunset Assembly Instructions

Design by nicola tonin

Advertisement

Quick Links

1 di 2
Fissare la mensola a parete ad altezza a piacere secondo lo
schema presente nella confezione della mensola.
Eseguire due fori sul muro rispettando le misure.
Fix the shelf to the wall, at the prefered height, according to
the diagram inserted in pack shelf.
Drill two holes on the wall observing the mesurements reported.
Inserire l'esteremità del cavo led nel foro fino a farlo
uscire inferioramente alla mensola.
Insert end LED cable into the hole, until it comes
out from the shelf bottom.
Tonin Casa
divisione della
Progetto Design International srl
sunset
design by Nicola Tonin
ferramenta
hardware
51 cm
34.5 cm
1
3
Via Palladio, 43
35010 San Giorgio in Bosco (PD), Italy
Inserire i tasselli ed avvitare le due viti, quindi appendere lo
specchio. Se necessario è possibile livellarlo agendo da sopra,
inserendo nei fori un cacciavite.
Insert anchors and tighten the two screws and the hang the mirror.
If necessary you can level it by acting with inserting a screwdriver
into the holes.
Montare anche lo specchio inferiore, fissandolo
alla mensola con le viti in dotazione.
Also mount the lower mirror, staring it
to the bottom of shelf with the
provided screws.
scheda di montaggio
assembly instructions
100% Made in Italy
ON/OFF
SOFT TOUCH
t +39 049 9453300
f +39 049 9450725
7501
2
4
info@tonincasa.it
www.tonincasa.it

Advertisement

loading
Need help?

Need help?

Do you have a question about the Sunset and is the answer not in the manual?

Questions and answers

Summary of Contents for TONIN CASA Sunset

  • Page 1 7501 design by Nicola Tonin 1 di 2 100% Made in Italy ferramenta hardware Inserire i tasselli ed avvitare le due viti, quindi appendere lo specchio. Se necessario è possibile livellarlo agendo da sopra, 51 cm 34.5 cm...
  • Page 2 7501 design by Nicola Tonin 2 di 2 100% Made in Italy Collegare il cavo led al cavo del trasformatore e inserire la spina nella presa di corrente. Connect the LED cable to the transformer cable and plug it into the power outlet.
  • Page 3 7501 design by Nicola Tonin REGGIMENSOLA REGISTRABILE ADJUSTABLE SHELF SUPPORT 100% Made in Italy chiave 12 mm 12 mm key + - 2 mm + - 2 mm + - 2.5 mm tipo misura...

This manual is also suitable for:

7501