LG 65UP7700PUB Service Manual page 26

10. Disassemble Sheet (1 sheet) and Diffuser Plate.
- Remove 1 sheets and one Diffuser Plate by lifting them at the same time.
- Assembly direction is divided by the chamfer shape of the Sheets/Diffuser Plate on the front
left down side of SET. (other than that, the corners are Right angle or Rounded)
Diffuser Plate1ea
Sheet 1ea
11. Disassembly of 19ea Support Diffuser Plates
- Rotate the Support DP counterclockwise 45 degrees to align it to the assembly hole and lift
it upwards to disassemble (Total 19ea)
12. Disassemble the Reflector Sheet.
- As the reflector hole is fixed to the lens, disassemble the reflector by release the the fixation
of lens from the end on the right.
a fixed part
SET Front
Direction
Left down
Chamfer
a fixed part
Diffuser Plate: Chamfer
- 26 -
Copyright © LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Sheet: Chamfer