D-Link DWA-X582 Quick Installation Manual

Wireless AX3000 Dual Band PCI Express Adapter
Беспроводной двухдиапазонный PCI Express адаптер AX3000
с поддержкой MU-MIMO
Бездротовий дводіапазонний PCI Express адаптер AX3000
з підтримкою MU-MIMO
MU-MIMO қолдаумен сымсыз екі диапазонды PCI Express
адаптері AX3000
DWA-X582
Quick Installation Guide
Краткое руководство по установке
Короткий посiбник зi встановлення
Орнату бойынша қысқаша нұсқаулық
PACKAGE CONTENTS
- DWA-X582 Wireless PCI Express Adapter
- Quick Installation Guide
If any of these items are missing from your packaging, please contact
your reseller.
INSTALLATION
1. Download the required driver on the DWA-X582 description page from
the www.dlink.com website.
2. Turn off your PC and disconnect the power cable. Open the housing of
your PC to get access to the motherboard.
3. Insert the DWA-X582 adapter carefully and firmly into any available PCI
Express slot. Secure the adapter with a screw.
4. Attach the housing of your PC and reconnect the power cable. Attach
both antennas to the DWA-X582 adapter and power on your PC.
5. If the "Found New Hardware Wizard" dialog box appears, press "Cancel".
6. Open a folder with the required driver and run the "setup.exe" file to
install the driver.
SETUP AND CONFIGURATION PROBLEMS
1. What should I do, if I've forgotten my wireless encryption key?
The wireless encryption key is configured at the Wireless Access Point or
Router. If you are unable to obtain your encryption key, the only solution
would be to reconfigure your Access Point/Router to use a new encryption
key. Please contact your Wireless Access Point/Router manufacturer.
2. Why can't I get a wireless connection?
- Check that your DWA-X582 is plugged in properly to the PCIe slot or try
to plug the DWA-X582 into another PCIe slot if it is available
- The LED on the DWA-X582 should be lit, otherwise there could be a
physical fault on the PCIe slot or the driver is not installed properly.
- Ensure that the wireless settings on the DWA-X582 match the settings on
your Access Point/Router. Please check and confirm your settings for
Wireless Network Name (SSID)
Wireless Encryption Key
Wireless Security Method (e.g. WEP, WPA2)
to check whether a wireless connection has been made, in the Windows
System Tray (bottom right).
- Check that your Internet is working fine on existing computers.
- Ensure that you have followed and completed the software installation
process, otherwise, please reinstall the software. The LED on the
DWA-X582 should come on after software installation.
1
ENGLISH