Tripp Lite N48M Series Installation Manual page 3

Installation
2
Extend the front door by pulling it away from the unit. Tighten the side screws.
2
3
Place the panel into position in an enclosure or open-
frame rack. Align the mounting holes and use rack-
mounting screws (2 per side, not included) to secure
the unit.
3
4
To access the MTP-MPO cables, untighten the two
handscrews located on the rear of the unit
B
top panel and flip down the rear access plate
A
4
3
Non-Extended
Extended
A
, lift the
C
A
B
C
.