Drying Phase - Launch CCH201 User Manual

2.2.2 Drying Phase

During the dring phase,exhast fan will be turned off ,the intaker fan still operate,the damper change to the
posistion shown in Fig.2.13.At the same time the burner start to operate,and supper the heating for the
booth throught the heat-exchanger,and the enter into the internal cycle system.The ventination style is
similar the the painting phase,but the air throught the basement will be taken into the intake fan again and
form the internal cycly system. The temperature of the air has to be fixed according to the type of paint.
Usually the setted temperature should be 60°C
SPRAY BOOTH USER MANUAL
Fig. 2.12
Fig. 2.13
- 11 -