Sony KDL-40S5100 Operating Instructions Manual page 9

Item
6 DIGITAL AUDIO
OUT (OPTICAL)
7 CABLE/
ANTENNA
8 PC IN
(RGB/AUDIO)
9 VIDEO IN 2
S VIDEO
VIDEO/
L (MONO)-
AUDIO-R
Be sure to refer to the Quick Setup Guide for:
• High quality picture performances
• Combination of equipment connections
• Cable types to use for connection
To view 480p, 720p, 1080i, and 1080p formats, an HDMI or Component video (YP
necessary. Connect your equipment properly and playback the video with capable equipment. This
TV displays all picture format types in a resolution of 1,920 dots × 1,080 lines.
Description
Connects to the optical audio input of a digital audio equipment that is PCM optical
compatible.
RF input that connects to your Cable or over-the-air antenna.
Connects to a personal computer's video and audio output connector. Can also be
connected to other analog RGB equipment.
For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If an adapter is used, connect the adapter to the computer before
connecting the HD15-HD15 cable.
You may need to adjust the TV settings or your PC's resolution and timing, see page
19 to setup your PC to this TV.
Connects to the composite video and audio output jacks on your A/V equipment
such as a DVD player or other video equipment. VIDEO IN 2 input is located on the
left side panel of the TV.
Connects to the S VIDEO output jack of your DVD or other video equipment that
has S VIDEO which provides better picture quality than composite video. The S
VIDEO does not provide sound; you will need to connect the audio cables.
P ) is
B R
9