Tv Controls And Indicators - Sony KDL-40S5100 Operating Instructions Manual

TV Controls and Indicators

1
Item
1 (IR) Infrared
Receives IR signals from the remote control.
Receiver
Light Sensor Senses room light level and adjusts the screen brightness accordingly. Do not put
anything near the sensor or the nearby general area (as shown above), as its function
may be affected.
2 PIC OFF/ Lights up in amber when the Timer or Sleep functions are set. When the timer is set,
TIMER LED
this LED will remain lit even if the TV is turned off. For details, see the online
Reference Book.
Lights up in green when the Backlight feature is activated to off (see the online
Reference Book for more details).
3 STANDBY LED Lights up in red when the function PC Power Management is activated and there
is no signal received while in the PC Input (see online Reference Book for more
details). If the LED blinks in red continuously, this may indicate the TV needs
servicing (see contacting Sony information on the front cover).
4 POWER LED
Lights up in green when the TV is turned on.
5 POWER
Press to turn on and off the TV.
6 + CHANNEL – Press to scan through channels. To scan quickly through channels, press and hold
down either +/–. In the MENU screen, these buttons serve as up/down buttons.
7 + VOLUME – Press to adjust the volume. In the MENU screen, these buttons serve as left/right
buttons.
8
Press to display the list of inputs. To toggle through the inputs, press the buttons
INPUT CHANNEL +/–.
In the MENU screen, this button serves to confirm the selection or setting.
9 MENU
Press to display MENU with TV functions and settings (see "Using the Menus" on page 20).
~
• The CHANNEL + button has a tactile dot. Use it as a reference when operating the TV.
PIC OFF / TIMER
2
Description
STANDBY POWER
3 4
POWER
5
CHANNEL
6
VOLUME
7
INPUT
8
9
MENU
15