Download Print this page

Siriusxm Operation - Polk Mono PA4A Installation And Operation Manual

Hide thumbs Also See for PA4A:

Advertisement

Available languages

Available languages

SIRIUS XM OPERATION
About SiriusXM
Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc.
and its subsidiaries. Visit www.siriusxm.com/xmlineup for updates. All
programming/channel lineup/ XM service subject to change or preemption. All
other marks and logos are the property of their respective owners. All rights
reserved.
NOTE: The SiriusXM Satellite Radio controls on this unit are available only
when an optional SiriusXM Connect Vehicle Tuner is connected.
Switching to SiriusXM Mode
Press the MODE button (7) to enter mode selection display. Press the SXM soft
button (9) to change to SiriusXM mode.
Accessing your SiriusXM Radio ID
To subscribe to the SiriusXM Satellite Radio service, it is necessary to locate and
identify the Radio ID of your SiriusXM Tuner. With the radio turned on, tune to the
SiriusXM preview channel on Channel 1. You should be able to hear the
SiriusXM preview channel even if your service is not activated.
1.
In SiriusXM mode, press and hold the Encoder Knob button (5) to select
Direct Channel Entry mode.
2.
Rotate the Encoder Knob to select each digit.
3.
Press the Encoder Knob button for each digit to enter "000".
4.
Upon entering the last digit, the unit will tune to the SiriusXM ID number for
your tuner.
5.
Write down the 8 digit ID number for reference.
NOTE: The SiriusXM Radio ID does not include the letters I, O, S or F.
Activating Your Service
1.
With the radio still turned on, tune to the SiriusXM preview channel on
Channel 1. You should be able to hear the SiriusXM preview channel even if
your service is not activated. If you cannot hear the preview channel, please
check the installation instructions to make sure your tuner is properly
installed.
2.
For subscriptions in the United States, please visit
www.siriusxm.com/activatenow or call SiriusXM Listener Care at
1-866-635-2349.
For subscriptions in Canada, please visit www.siriusxm.ca/activatexm or call
XM Listener Care at 1-877-438-9677
NOTE: As part of the activation process, the SiriusXM satellites will send an
activation message to your tuner (see "Advisory Messages Reported by the
SiriusXM Vehicle Tuner"). When your radio detects that the tuner has
received the activation message, your radio will display: "Subscription
Updated". Once subscribed, you can tune to channels in your subscription
plan. Note, the activation process usually takes 10 to 15 minutes, but may
take up to an hour. Your radio will need to be powered on and receiving the
SiriusXM signal to receive the activation message.
14
PA4A

Advertisement

loading