NIVELCO NITIME User Manual

1. APPLICATION
NITIME time relays are microprocessor-controlled units suitable for highly diverse timing tasks. The multiple functions, the
universal power supply and (1-module width) the rail mountable construction ensure universal usage (automation, lighting,
heating, motor and ventilation control).
2. TECHNNICAL DATA
2.1 G
ENERAL DATA
TYPE
Number of functions
Time range
Time setting controls
Reset time
Time deviation
Repeat accuracy
Temperature coefficient
Power supply
Power consumption
Relay
Rated current
Inrush current
Output indication
Output Switching voltage
Switching power
Min. switching power
Electrical lifespan (AC1)
Mechanical lifespan
Electrical connection
Electrical protection
Mechanical connection
Ingress protection
Ambient temperature
Weight
2.4 D
IMENSIONS
3. INSTALLATION
NITIME time relays can be mounted on DIN EN 60715 rails.
The device should not be installed in highly electromagnetic environment.
Operating temperature must not exceed the limit of the specified operation
temperature even in conditions such as increased ambient temperature or
continuous operation. The device is completely electronic. Consider this during the
installation.
4. WIRING
Thank you for choosing NIVELCO instrument.
JEL–111
10
0.1 sec...10 days
rotary switch and potentiometer
5% – mechanical setting
0.2% – set value stability
0.7...3 VA AC, 0.5...1.7 W DC
4000 VA AC1, 384 W DC
terminal for 2.5 mm
Class II. reinforced insulation
–20...+55 °C (−4...+131 °F)
90 g (0.14 lb)
JEL–121
2
0.1 sec...100 days
max. 150 ms
0.01% /°C @20 °C
12...240 V AC/DC
1× SPDT
16 A AC1
30 A (<3 sec)
multifunctional LED
250 V AC1 / 24 V DC
500 mW DC
0.7 × 10 switching
5
3 × 10 switching
7
(AWG14) wire cross-section
2
DIN EN60715 rail
IP20
70 g (0.143 lb)
5. COMMISSIONING
5.1 A
DJUSTMENT
The green LED (Un) shows when the unit is turned ON, while the
status of the output is indicated by the multifunctional red LED.
(LED 2). Time and function settings can be set using the
potentiometer and the rotary switch on the front panel.
2.2 A
CCESSORIES
User's manual
–
Warranty Card
–
Declaration of Conformity
–
2.3 O
RDER CODE
NITIME J E L – 1
Type
Multifunction
Pulse cycler
JEL–121
1
Code
1
2
JEL–111

jel111en1803h 1 / 2