Advertisement
Installing the Manager Program
Introduction
Download
the Manager Program
the Manager Program
VW MiniLogger, 2018/8/24
The Manager program is used to program the MiniLogger and
to retrieve stored data. You can download the most recent ver-
sion of the program from www.durhamgeo.com.
Logger Manager can be downloaded free of charge from the
Durham Geo Slope Indicator website at:
https://durhamgeo.com/resources/download-pages/software/
Please check the site occasionally to verify that you have the
most recent version.
Start your internet browser. Click in the address field, enter
1.
www.durhamgeo.com, and press Enter. When the website
appears:
Click on Resources, then click on Software in the Downloads
2.
section.
Scroll down to Loggers & Readouts and choose the Logger
3.
Manager (32-bit or 64-bit) that is appropriate for your com-
puter's operating system. Click on the link to start download-
ing the setup file.
Double-click on the downloaded file, which is called "setup-
4.
manager.exe."
Follow on-screen setup instructions. If you are prompted to
5.
install the FTDI Chip CDM Driver, Click OK to proceed with
installation of the driver. Afterwards, you will find a shortcut
named Logger Manager on your start menu. The actual path
to your program is normally C:\Program Files\Logger Man-
ager\LoggerManager.exe.
Updating
Follow the steps above to download the most recent version
1.
of the Manager program.
When you double-click on the downloaded file (setupman-
2.
ager.exe), a dialog asks if you want to modify, repair, or
remove the file. Choose remove. Windows then removes your
old Manager program (but not any data). If Windows does
not automatically prompt you to remove the old program,
stop the installation process and manually remove the old
program via the Windows Control Panel before continuing to
install the updated version.
Once the old version has been deleted, install the new version.
3.
2
Advertisement
