Auxiliary Connector - Jkt73-2 - Honeywell BENDIX KING KT 73 Installation Manual

Mode s transponder

Hide thumbs Also See for BENDIX KING KT 73:

Theory of operation (4 pages)

Table Of Contents

Table of Contents

Preliminary - Subject To Change Without Notice

BENDIX/KING

Pin D;

GILLHAM ALTITUDE C1/ARINC429 RX 0B

This line is programmable as a Gillham altitude input as defined for pin 8 or as the

receive line of an ARINC 429 port used to report altitude.

Pin E;

GILLHAM ALTITUDE B1/ARINC429 RX 0A

This line is programmable as a Gillham altitude input as defined for pin 8 or as the

receive line of an ARINC 429 port used to report altitude.

Pin F;

EXTERNAL IDENT~

GND (<10 ohms) will initiate IDENT sequence. HIGH = resistance-to-ground > 100KΩ

(inactive IDENT).

Pin H;

GILLHAM ALTITUDE C4/RS485 RX B

This line is programmable as a Gillham altitude input as defined for pin 8 or as the

receive line reserved for a future interface.

Pin J;

GILLHAM ALTITUDE A4/RS485 RX A

This line is programmable as a Gillham altitude input as defined for pin 8 or as the

receive line reserved for a future interface.

Pin K;

GILLHAM ALTITUDE A2/RS485 TX B

This line is programmable as a Gillham altitude input as defined for pin 8 or as the

transmit line reserved for a future interface.

Pin L;

GILLHAM ALTITUDE C2/RS485 TX A

This line is programmable as a Gillham altitude input as defined for pin 8 or as the

transmit line reserved for a future interface.

Pin M;

GILLHAM ALTITUDE A1

This line is programmable as a Gillham altitude input as defined for pin 8.

Pin N;

TIS 429 TX A

Standard ARINC 429 output used to broadcast traffic information services to a display.