Page 1
Governor Gasket Strainer Gasket Discharge Valve Spring Cylinder Head Gasket Inlet Valve Gasket Discharge Valve Seat Inlet Valve Unloader Spring Included in the compressor unloader kit contained in this kit. Figure 1 – Bendix BX-2150 Compressor Maintenance Kit Contents ® ™...
Page 2
"dressed" with a lapping stone to improve their ▲The power MUST be temporarily disconnected from the condition. radar sensor whenever any tests USING A DYNAMOMETER are conducted on a vehicle equipped with a Bendix ® Wingman system. ®...
Page 3
ASSEMBLY CHECK FOR COMPRESSOR OPERATION Use contents contained in both kits. 1. Start the engine and observe the system pressure gauge to ensure the compressor is pumping. Observe 1. Install the unloader stop and o-ring assembly (1 & 2) that the compressor unloads (stops pumping) at the into the threaded port on the top of the head above the governor cut-out setting.