Sony SU-P42T2 Instructions for stand (primary manual) Instructions Manual page 10

4 Reattach the cable cover to the stand.
Safety measures to prevent toppling over
WARNING
Be sure to take measures to prevent the stand from toppling over. If you fail to do so, the Tabletop Stand may
topple over and cause injury or property damage. Anchor the Tabletop Stand to a wall, pillar, etc. to prevent it
from toppling over.
Prepare a commercially available rope or chain and wall anchor bracket beforehand.
1 Secure the wall anchor bracket to a solid wall or pillar.
2 Pass the rope or chain through both holes of the anchor attachments and then tighten the other end of the
rope or chain to the wall anchor bracket.
10
(US)
Cable cover
All models
Anchor attachments
All models
1
2
Wall anchor
bracket