Table of Contents
Advertisement
Quick Links
CONTENT
User Guide
Introduction................................................................................2
Framework of the microscope system .......................................2
Working principles of the video microscope system .................2
Functions and features ...............................................................3
Parameters & Specification........................................................4
3 Dimensional
Instruction of whole machine.....................................................6
Video Microscope
Operation and usage...................................................................8
Errors and dysfunctions diagnosis/analysis: ............................12
PCE-MVM 3D
PCE Deutschland GmbH
Please read through the User Manual carefully before use.
1
2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PCE Instruments PCE-MVM 3D
Summary of Contents for PCE Instruments PCE-MVM 3D
- Page 1 Working principles of the video microscope system ....2 Functions and features ...............3 Parameters & Specification............4 3 Dimensional Instruction of whole machine.............6 Video Microscope Operation and usage..............8 Errors and dysfunctions diagnosis/analysis: ......12 PCE-MVM 3D PCE Deutschland GmbH Please read through the User Manual carefully before use.
- Page 2 Consisting of motorized rotating watching device, varifocal microscope, Attentions CCD camera and LCD; PCE-MVM 3D is a 2/3Dimensional automatic video Do not disassemble the equipment without correct guide otherwise microscope. Besides, it can be connected to PC via the USB2.0 access, faults or errors may happen.
- Page 3 Parameters & Specification well. The rotating watching device gets a rotating picture of the tested object from an angle of 45°, on the display, the picture will be of 3D effect; Users 1. System magnification: 12X—75X can get the picture of ideal video effect by turning the zooming ring of the Remark: System magnification is the ratio of the size of the tested part on lens section.
- Page 4 Instruction of whole machine Memory: 256MB above. Hard disk capacity: 500MB above. USB access: 2.0 Remark: The picture effect will be affected if the PC can not meet the above settings. 7. Electrical index of the built-in LED lamp Max. Working voltage: DC 12V Voltage adjustment range: DC 7.5-10.5V 8.
- Page 5 B.2. Motorized rotating watching device, main lens, CCD camera B.4. Function Buttons: （picture 5） ①: Power on/off button of the LCD display screen ② : Power on/off of top halogen lamp/confirming OSD parameters adjustment ③: OSD menu; enter into OSD menu, and its items and options. ④⑤: Choosing the menu and its item and options.
- Page 6 confirm. And press button “ adjust the height of microscope and make the distance between the tested /OK”again to turn off the LED lamp. object with the surface of lens is around 30mm, and then turn softly the brightness adjusting rings for Adjusting brightness of the halogen lamps manual zooming nut till get the clearest picture halogen lamps are in the left side of the base of the unit, turn the...
- Page 7 c. to adjust the brightness, press “+” or “-“, to activate other options, press Installation of the USB2.0 access driver and the operation processes : “▽”or“△”to select. For installation steps, please refer to “Installation manual of the USB2.0 d. once the options is selected, press “+” or “-“ to adjust. access driver”.
- Page 8 of motor damage. The bottom light use same power supply as the motor, so can check the bottom light power to check if power supply is normal or not. 6. No image on the video microscope screen: This may result from many factors, among which the most common two are display screen dysfunction and signal dysfunction.
Need help?
Do you have a question about the PCE-MVM 3D and is the answer not in the manual?
Questions and answers