Table of Contents
Advertisement
JD PE eng 4.QXP
1/28/2016
WINDSHIELD DEFROSTING AND DEFOGGING
-
WARNING
Do not use the
cooling operation in extremely
humid weather. The difference
between the temperature of the out-
side air and the windshield could
cause the outer surface of the
windshield to fog up, causing loss
of visibility. In this case, set the
mode selection to the
and fan speed control to the lower
speed.
• For maximum defrosting, set the tem-
perature control to the hottest position
and the fan speed control to the high-
est speed.
• If warm air to the floor is desired while
defrosting or defogging, set the mode
to the floor-defrost position.
• Before driving, clear all snow and ice
from the windshield, rear window, out-
side rear view mirrors, and all side win-
dows.
• Clear all snow and ice from the hood
and air inlet in the cowl grill to improve
heater and defroster efficiency and to
reduce the probability of fogging up the
inside of the windshield.
5:24 PM
Page 157
Windshield
heating
position during
position
Manual climate control system
To defog inside windshield
1. Set the fan speed to the desired posi-
tion.
2. Select desired temperature.
3. Select the
4. The outside (fresh) air will be selected
automatically. If the
selected, air conditioning (if equipped)
will also be selected automatically.
If the air conditioning and/or outside
(fresh) air position are not selected auto-
matically, press the corresponding button
manually.
OJD042123
To defrost outside windshield
1. Set the fan speed to the highest posi-
tion.
2. Set the temperature to the hottest
position.
3. Select the
position.
4. The outside (fresh) air and air condi-
tioning will be selected automatically.
position is
Features of your vehicle
OJD042124
position.
4 157
Advertisement
Chapters
Table of Contents
