Dell E2222H User Manual page 30

Icon Menu and
submenus
Input
Source
VGA
DP
Auto Select
Reset Input
Source
│
30 Operating your monitor
The following dialog appears on a black screen as the monitor self-
adjusts to the current input:
Auto Adjust allows the monitor to self-adjust to the incoming video
signal. After using Auto Adjustment, you can further tune your monitor
by using the Pixel Clock (Coarse) and Phase (Fine) controls under
Display.
NOTE: Auto Adjust does not occur if you press the button
while there are no active video input signals or attached
cables.
This option is available only when you are using the analog
(VGA) connector.
Use the Input Source menu to switch between the different video
signals that may be connected to your monitor.
Dell 22 Monitor
Brightness / Contrast
Auto Adjust
Input Source
Color
Display
Menu
Personalize
Others
Push to select the VGA input source when using VGA connector.
Push to select the DP input source when using DP connector.
Select Auto Select to scan for available input signals.
Select this option to restore default input source.
Description
Auto Adjustment in Progress...
VGA
DP
Auto Select
Reset Input Source
On