End Of Document - Dell Networking N2128PX-ON Series Upgrading Firmware

Firmware Upgrade Procedure Dell™ Networking N2100 Series Switches
Extracting Operational Code from .stk file...done.
Loading Operational Code...done.
Decompressing Operational Code...done.
Uncompressing apps.lzma
Uncompressing python.lzma
Installing Python
<185> Nov 27 18:53:09 0.0.0.0-0 General[fp_main_task]: unitmgr.c(6606) 1 %% Reboot 1 (0x1)
DMA pool size: 16777216
AXI unit 0: Dev 0xb547, Rev 0x01, Chip BCM56547_A0, Driver BCM56340_A0
SOC unit 0 attached to PCI device BCM56547_A0
Using a clock divider of 16 for mac_cclk
<186> Nov 27 22:53:18 0.0.0.0-1 General[fp_main_task]: bootos.c(191) 8 %% Event(0xaaaaaaaa)
started!
<185> Nov 27 22:53:18 0.0.0.0-1 SIM[Cnfgr_Thread ]: sim_util.c(3889) 10 %% Switch was reset
due to operator intervention.
(Unit 1 - Waiting to select management unit)>
Applying Global configuration, please wait ...
Applying Interface configuration, please wait ...
console>
5. Verify that the 6.3.6.9 version of firmware is loaded on the switch.
console#show version
Machine Description............... Dell Networking Switch
System Model ID................... N2128PX-ON
Machine Type...................... Dell Networking N2128PX-ON
Serial Number..................... 15114M0002LF
Manufacturer...................... 0xbc00
Burned In MAC Address............. 001E.C9E5.BD0F
System Object ID.................. 1.3.6.1.4.1.674.10895.3066
SOC Version....................... BCM56150_A0
HW Version........................ 1
CPLD Version...................... 16
unit active
---- ----------- ----------- -------------- --------------
1 6.3.6.9
backup current-active next-active
6.3.6.4 6.3.6.9

End of document

6.3.6.9
Page 12