Table of Contents
Advertisement
Installing child restraints using a seat belt
Rear-facing Baby seat (infant seat)/child seat (convertible seat)
■
Place the child restraint system
1
on the rear seat facing the rear
of the vehicle.
Run the seat belt through the
2
child restraint system and
insert the plate into the buckle.
Make sure that the belt is not
twisted.
Follow the directions given in the
child restraint system installation
manual and fix the child restraint
system securely in place.
If your child restraint system is not
equipped with a lock-off (a seat
belt locking feature), secure the
child restraint system using a
locking clip.
After installing the child restraint system, rock it back and forth to
ensure that it is installed securely.
1-1. For safe use
91
1
Advertisement
Table of Contents
